Cockpit Voice Recorder (CVR) Panel
Description
The Cockpit Voice Recorder (CVR) Panel is used to control the cockpit voice recorder system.
Usage
Test pb
- When pressed, tests the CVR.
- If a boomset is connected to the BOOMSET jack, the flight crew will hear a low frequency signal.
- If the test is not successful, the ECAM triggers a RECORDER CVR FAULT alert 5 s after the pushbutton is pressed.
- To perform this test, the recorder must be on.
ERASE pb
- When pressed for 2 seconds, the audio recording is erased, if the aircraft is on ground, and the parking brake is on.
- Note: Data recording cannot be erased.
- If a boomset is connected into the BOOMSET jack, the flight crew will hear a low frequency signal.
- To erase audio recording, the recorder must be in use.